The product is a new saving-energy switch; it adopts good sensitivity detector, integrated circuit. It gathers automatism, convenience, safety, saving energy and practicality functions. The wide detection field is consisting of detectors. It works by receiving human motion infrared rays.
When one enters the detection field, it can start the load at once and identify automatically day and night; its installation is very convenient and its use is very wide. It has functions of power indication and the detection indication.
FUNCTION:
- Can identify day and night: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted to the sun position (max). It can work in the ambient light less than 3LUX when it is adjusted to the moon position (min). As for the adjustment pattern, please refer to the testing pattern.
- Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the base of the first time-delay rest.
- Time Delay is adjustable. It can be set according to the consumer's desire. The minimum time is 10sec3sec. The maximum is 7min2min.
INSTALLATION:
- Switch off the power.
- Screw off the nail on the bottom. Open the wire hole. The power wire and the load wire are bored at the bottom.
- Fix the bottom in the selected position with the inflated screw.
- Connect the power and the load with the connection-wire column
- Fix the sensor on the bottom, please screw the nail and switch on the power. So you can test it.
All electrical work should be undertaken by a qualified electrician.
IPP44 meaning
4 Protected against solid objects over 1mm (tools/wires / small wires) 4 Protected against water sprayed from all directions - limited ingress permitted |
|
|
|