In Stock
Introducing the IP65 Ceiling PIR Infrared Motion Sensor manual override, specifically designed for bathroom use...
Introducing the IP65 Ceiling PIR Infrared Motion Sensor manual override, specifically designed for bathroom use with IP65 protection. This motion sensor is powered by a 220-240V/AC source and operates at a frequency of 50/60Hz. Boasting a 360° detection range, it can detect movement up to 8m away (at temperatures below 24℃).
The IP65 Ceiling PIR Infrared Motion Sensor manual override sensor's ambient light sensitivity can be adjusted between 3 and 2000 LUX to accommodate various lighting conditions. It is built to withstand temperatures ranging from -20℃ to +40℃ and has a working humidity level of less than 93% RH.
IP65 Ceiling PIR Infrared Motion Sensor manual override time delay can be set from a minimum of 10 seconds (±3 seconds) to a maximum of 30 minutes (±2 minutes), with a power consumption of approximately 0.5W. The device can support a rated load of up to 2000W.
For optimal performance, install the sensor at a height between 2.2 and 4 meters. The sensor can detect movement speeds ranging from 0.6 to 1.5m/s. The device's dimensions are 110 x 24mm, making it a compact and versatile addition to your bathroom setup.
SPECIFICATION:
Power Source: 220-240V/AC
Detection Range: 360°
Power Frequency: 50/60Hz
Detection Distance: 8m max(<24℃)
Ambient Light: <3-2000LUX (adjustable)
Working Temperature: -20~+40℃
Time Delay: Min.10sec±3sec
Working Humidity: <93%RH
Max.30min±2min
Power Consumption: approx 0.5W
Rated Load: Max.2000W
Delivery for order less than £ 20.00 |
£ 3.00 |
Next day delivery |
£ 8.00 |
Order over £ 20.00 |
Free 2-4 day Tracked service |
Order over £ 100.00 |
Free next day |
Cut off time for next day order |
1 PM |